RF power amplifier modules, driver-stage and SSPA / GaN options, plus filters, switches and microwave components. Current specs and configurations confirmed by inquiry.
Jingmu Security supplies RF and microwave building blocks for receiver, transmitter and instrumentation signal chains. The catalog spans low-noise and GaN power amplifiers, filters and diplexers, switches, couplers and dividers, frequency sources, mixers and integrated microwave modules. Selected lines support photonics-assisted RF distribution for broadband link applications.
Share your application, key requirements, quantity and destination. We will confirm available documentation and selection options for your inquiry; this page does not confirm stock or delivery.
Module & system selection
Discuss driver and final-stage solid-state power amplifier (SSPA) modules for RF signal chains, instrument excitation and EMC test setups. GaN options, operating bands, output ratings and integration features are confirmed for the selected model, not inferred from the family name.
Match a signal source or preceding stage to the drive level required by a downstream amplifier. Consider gain distribution, input limits, linearity and stability across the required band.
Confirm: input / output levels, gain and flatness, P1dB, interstage matching and bias.
Evaluate final-stage power amplification against the required usable output and thermal budget. GaN is a technology option, not a guarantee of bandwidth, efficiency or ruggedness.
Confirm: linear output versus P1dB / Psat, harmonics, efficiency conditions, cooling and load mismatch.
Specify whether the signal is continuous-wave (CW), modulated or pulsed. Peak pulse power is not a continuous output rating; permitted operation depends on pulse timing, duty cycle and cooling.
Confirm: average and peak power, pulse width, repetition rate, duty cycle and timing.
Discuss enable / blanking, status monitoring, interlocks and thermal or reflected-power protection where supported. Define DC supply, startup sequence and mechanical interfaces before integration.
Confirm: supported signals / protocol, protection thresholds, recovery behavior, connectors and mounting.
Selection and integration support is discussed against your requirement. No universal power / frequency range, inventory, certification or complete-system delivery is promised here. Current specs, configuration, availability and lead time require written confirmation.
Specs and selection guidance only; no file downloads or uploads. Request current specs and documentation by email.
Explore RF & EMC test-system configurations →Ranges describe different product families, not the continuous bandwidth of one item. Performance, frequency rating and availability require confirmation for the selected model.
How to specify a low-noise or small-signal RF amplifier for a receiver front-end — noise figure, gain and flatness, linearity (P1dB/IP3), and the parameters that set system sensitivity across DC to 40 GHz.
A practical briefing on GaN solid-state power amplifiers — how GaN compares with LDMOS and GaAs, why thermal design dominates, and the efficiency-versus-linearity trade-offs for high-power RF building blocks.
The catalog covers low-noise, small-signal and GaN solid-state power amplifiers; filters, diplexers and multiplexers; switches, couplers, dividers and terminations; crystal and PLL frequency sources, VCOs and reference oscillators; mixers and multipliers; and integrated microwave modules including photonics-enabled links.
DC to 40 GHz describes the combined range of selected RF component families, not a power amplifier operating down to DC or a single model covering that span. Amplifier bands, output and operating modes are model-specific. Filters in LC, cavity, suspended-substrate and LTCC forms also have independent usable ranges; confirm current specs by written inquiry.
Provide band edges, waveform, gain, required linear output or P1dB / Psat, CW or peak / average pulse power, pulse width and duty cycle. Also specify supply, cooling, load mismatch, connectors, control and acceptance conditions. Peak pulse power or saturation power is not a continuous linear-output guarantee; GaN options and protection features require model-level confirmation.
No. This catalog is presented at capability and range level only. Models, specifications and pricing are provided against written inquiry, which also lets us check availability for your destination.
Last updated 2026-10-28.
These are selection questions, not a promise of stock, certification, delivery or a particular rating.
This website shows specification summaries and selection guidance, not downloadable product files. Email market@jingmusecurity.com for the current datasheet/spec, drawings, availability and selection support. No pricing is published.
Contact / RFQ